How to install cabinet pulls

How to install cabinet pulls

Today, Probrico will teach you three tips on how to install cabinet pulls by yourself, it is easy and quickly.

1. Gather the necessary tools.

You'll need a measuring tape or ruler, a pencil, a power drill, a drill bit (usually the same size as the screws provided with the pulls), a screwdriver, and the cabinet pulls themselves.

2. Determine the placement

You need to make holes on your cabinets, but how to make holes, where is the correct part to make holes? Now, we need few tools.

measurement tool
This is suit for everyone, it is easy to use.
3. Mark the hole positions:
Once you've determined the placement, use a pencil to mark the hole positions on the cabinet.
measurements tools

Put this tool on your cabinet, use one pencil to sign it.

measurement tool
Then put your pull on it too, find the another hole part. Now, you have found two holes.
4. Pre-drill the holes.
Use a power drill with a drill bit that matches the size of the screws provided with the pulls.
drill the holes
5. Attach the pulls.
Last step, install the pulls. As usual, probrico pulls will prepare two size mounting screws, M4*25mm and M4*45mm size. Take one of the pulls and align it with the pre-drilled holes. Insert the screws through the holes on the inside of the cabinets and tighten them by hand until they're snug. Then, use a screwdriver to securely fasten the screws.
install cabinet pulls
Now, you have installed the pulls successfully, enjoy your new cabinet handles.
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.