When we use a pull, first we hope it is useful to open a door or a drawer. Then we hope it is beautiful, giving the integrated cupboard a good looking.
Here is some tips to choose a right pull:
a): Confirm the pull's length.
* Measure the hole spacing between the pull legs.
* Measure the drilled holes distance in the cabinet door or drawer front.
It is a must for Old Cabinet or Pre-drilled Cabinet, if your cabinet is new and isn't drilled, you could confirm the length according to your cabinet door or drawer front size.
Normally:
|
cabinet door or drawer front size
|
holes spacing of the pull
|
|
<500mm
|
Single Hole or 64-76mm
|
|
500-800mm
|
76-96mm
|
|
800-1000mm
|
96-128mm
|
|
>1000mm
|
128mm-160mm or bigger
|
b): Choose the pulls & knobs style you like.
c): Don't forget the screws.
Normally the screws are included. but the screws length is 20mm or 25mm，normally fit for 12-19mm thickness. If your cabinet door or drawer front is thicker, you need longer screws.
So please don't forget to measure the thickness of the cabinet door or drawer front.
For Probrico Pulls:
|
Cabinet Door or Drawer Front Thickness
|
Need Screws Length
|
|
12-19mm
|
25mm
|
|
17-24mm
|
30mm
|
|
22-29mm
|
35mm
|
|
27-34mm
|
40mm
|
|
32-39mm
|
45mm
|
|
37-44mm
|
50mm
|
d): Other concerns:
Pull's leg size: For old Cabinet, when the old handle is removed, print will be left on the cabinet. So the new handle should cover the handle for a good look.
Pull's projection: Means the pull's height. if the pull is two small,it will be not easy for use. Normally 25-35mm will be great.